DISH Network 138410 Manuel D’Utilisation

6. Connect the A

 or the P

 on the receiver, as needed, to the corresponding HDTV audio 

inputs to hear sound.
Note: The default resolution on both HDTV outputs is 480p until the 

receiver is authorized and subscribed to a qualifying programming package 

and the desired HDTV resolution has been selected.

You must keep the receiver connected to an active telephone line. Otherwise, 

you may not be able to order Pay-Per-View programs or use all of the 

 

 features. Run a telephone cable with a standard RJ-11 

connector from the receiver's back panel P

 to an active telephone 

connection.

: You may be able to use a wireless telephone extender. However, this may 

not support all the features of your receiver, such as Caller ID.
You must also set up the receiver for your telephone system (touchtone or 

rotary/pulse), and set a telephone number prefix, if you need a prefix to make an 

outside call.

1. Display the

 menu (press MENU then 6-1).

2. Select the 

 option (4) to display the

 menu.

3. Select the 

 or the 

 option in the 

 list.

4. If you do not need a dialing prefix to call outside your premises, select the

 option, and stop here. If you do need to set a prefix to dial outside 

your premises (for example, dial 9 to get an outside line), go to step 5.

: Usually, you need a telephone number prefix only for business 

installations. For most residential installations, all you need to do is set the 

telephone system type. 
5. Move the highlight to the 

 list. Press the SELECT/OK 

button to select the highlighted option.