DISH Network 138410 Manuel D’Utilisation

3. Select the 

 option. 

4. Select the language you want in the 

 list.

: 

 provides visually-impaired customers with a visual 

description of the program, if available.

5. Select 

 to save your language choice. The receiver displays the 

menu.

6. Press VIEW TV to exit the 

 menu.

You can set the remote to four different modes to control the receiver or 
other devices. This section explains how to set up the remote to control a 
device, such as a satellite TV receiver, a TV, a VCR, a DVD player, 

 

a tuner, or an amplifier. 

To set the remote to the right mode for a device, use the remote control’s 
mode buttons, SAT (satellite receiver), TV, VCR (for a VCR or a DVD 
player), and AUX (“auxiliary,” for a DVD player, or an audio amplifier). To 
change the mode, press the button for the device you want the remote to 
control. The mode button flashes once to show you’ve set the remote to that 
mode.

You can program your remote control in Limited Mode to keep from 
accidentally changing the channel on your TV or VCR. When you use the 
remote to control your TV in Limited Mode, you will only be able to use the 
POWER, MUTE, and VOLUME buttons. Also, when you use the remote to 
control your VCR in Limited Mode, you will only be able to use the 
POWER and VCR tape control buttons.

The section Set Up the Remote Control has a step that tells the remote 
control to go into Limited Mode.

Note: Limited Mode is not used with cable boxes or amplifiers.

If you are programming the remote to control a combination device, such as 
a TV/VCR or a TV/DVD, program the remote control in one mode, and 
then repeat the procedure in the other mode. For example, to program the 
remote to control a TV/VCR using code 748, follow the instructions to 
program the remote to control the TV using code 748, and then repeat the 
instructions for the VCR using the same code.