Avaya 4622SW IP Manuel D’Utilisation

6. To change the name, press the Line/Feature button to the left of the Name field. Then use 

the Left Arrow softkey and/or the Right Arrow softkey to move the cursor to the right of the 
character(s) to be changed. Press the Backspace button to remove the character(s) and 
re-enter the character(s). The Name field allows up to 13 characters.

7. When the Name and/or Number is updated, press the Save softkey to add the information 

to a Speed Dial button. (Press the Cancel softkey to exit without saving.)

The Name/Number entry is updated, and all Speed Dial buttons are re-sorted in 
alphabetical order by Name. The Speed Dial Main screen redisplays. 

8. To update another Speed Dial button, repeat this procedure from Step 

9. To exit the Speed Dial application, press the Phone/Exit (

) button.

To delete a Speed Dial button label:

1. Access the Speed Dial application by pressing the SpDial softkey.

The Speed Dial Main screen displays. 

2. Use the Page Left and/or Page Right buttons as appropriate until the entry you want to 

delete displays.

Note:

Your Telephone Administrator can turn off the ability to make changes to the 
Speed Dial buttons. If this is the case, you will not be shown softkeys labeled 
Add, Edit, or Delete, and you cannot perform any of those actions.

3. Press the Delete softkey.

The prompt “Select label to delete” displays. 

4. Press the Line/Feature button that corresponds to the button you want to remove. 

The Speed Dial Deletion screen displays the prompt “Press Delete again to confirm.” 

5. Visually verify that you want to delete the Name and Number displayed, then choose one of 

the following options:

Cancel the deletion without 
removing this Speed Dial button.

Press Cancel.
No deletion occurs. The Speed Dial Main screen displays. 

Complete removing this Speed 
Dial button.

Press Delete.
The label is removed. The remaining Speed Dial buttons 
are re-sorted by Name and the Speed Dial Main screen 
displays.