Avaya 4622SW IP Manuel D’Utilisation

Call Log Enabled (active) is the default. For privacy purposes, you can change the status to 
Disabled, to stop call logging and delete any calls currently logged.

1. To change this option, press the corresponding Line/Feature button.

2. Press the Line/Feature button for the next setting you want to change or save this setting by 

pressing the Save softkey. (To restore the previous setting without making a change, press 
the Cancel softkey.)

Upon saving or cancelling, the first Options Main screen displays. If you changed the status 
from “Disabled” to “Enabled” all incoming and outgoing calls will now be logged. If you 
changed the status from Enabled to Disabled, all calls from each Call Log are deleted and 
future incoming/outgoing calls are not logged.

Your 4622SW IP Telephone has eight ringing pattern options. You can hear the patterns and 
select the one you prefer using the Personal Ringing option.

You select this option from the Options Main screen, accessed by pressing the phone’s Option 
button.

1. To hear a ring pattern, press the Line/Feature button to the left or right of any numbered 

pattern. 

The Current Pattern number changes to the selected pattern, which rings once. 

2. Repeat Step 

 until your preferred pattern appears as the Current Pattern.

3. Save the setting by pressing the Save softkey or to restore the previous setting without 

making a change, press the Cancel softkey.

The first Options Main screen displays. 

Note:

Going off-hook, receiving a call, or losing power during ring pattern selection 
interrupts the process, and you must start over from Step 

. 

Adjust the ringer volume using the Volume Control buttons, as discussed in