Avaya 555-233-128 Manuel D’Utilisation

System busy

 

VISUAL INDICATION: Message Waiting indicators at top of telephone 
and left middle of faceplate display a broken flutter continuously 
(alternating 50 milliseconds on, 50 milliseconds off for 500 milliseconds 
followed by 500 milliseconds off) until either the “*” or “#” button is pressed. 
CAUSE: Most likely, the number of IP endpoints on the PBX is already at 
maximum, Less likely, network resource is unavailable. 
RESOLUTION: The telephone was attempting to access the PBX and was 
not successful. Check the resource being called upon for its availability. If 
the resource appears operational and properly linked to the network, verify 
that addressing is accurate and a that communication path exists in both 
directions between the telephone and the resource. Press * and use the 
same values to retry the process. Or, press # to restart, then re-enter the 
extension and password.

System Error

 

VISUAL INDICATION: Message Waiting indicators at top of telephone 
and left middle of faceplate display a broken flutter continuously 
(alternating 50 milliseconds on, 50 milliseconds off for 500 milliseconds 
followed by 500 milliseconds off) until either the “*” or “#” button is pressed. 
CAUSE: The PBX has an unspecified problem.
RESOLUTION: Press * and use the same values to retry the process. Or, 
press # to restart, then re-enter the extension and password. Consult your 
Avaya Media Server administration and troubleshooting documentation.

Undefined 
Error

 

VISUAL INDICATION: Message Waiting indicators at top of telephone 
and left middle of faceplate display a broken flutter continuously 
(alternating 50 milliseconds on, 50 milliseconds off for 500 milliseconds 
followed by 500 milliseconds off) until either the “*” or “#” button is pressed. 
CAUSE: The PBX has rejected registration for an unspecified reason.
RESOLUTION: Press * and use the same values to retry the process. Or, 
press # to restart, then re-enter the extension and password. Consult your 
Avaya Media Server administration and troubleshooting documentation.

Wrong Set 
Type

 

VISUAL INDICATION: Message Waiting indicators at top of telephone 
and left middle of faceplate display a broken flutter continuously 
(alternating 50 milliseconds on, 50 milliseconds off for 500 milliseconds 
followed by 500 milliseconds off) until either the “*” or “#” button is pressed. 
CAUSE: The PBX does not recognize the set type.
RESOLUTION: Ensure the PBX is properly administered to expect the 
appropriate telephone for the IP Address and extension. Press * and use 
the same values to retry the process. Or, press # to restart, then re-enter 
the extension and password.