Avaya 555-233-128 Manuel D’Utilisation

4. When control is passed to the software that was just loaded, the following messages 

display:

This message continues while the new boot code is being written into RAM.

Note:

Unplugging the telephone while the flash memory is being erased and the boot 
code rewritten can cause file corruption.

5. The telephone detects and displays the speed of the Ethernet interface in Mbps, that is, 0, 

10, or 100. The message No Ethernet displays until the software determines whether the 
interface is 10 Mbps or 100 Mbps.

Note:

The Ethernet speed indicated is the LAN interface speed for both the telephone 
and any attached PC.

6. The software determines whether sufficient IP Address information was downloaded. In this 

scenario, it is discovered that sufficient information has not been downloaded. The 
following message displays while the DHCP process is invoked:

The number of elapsed seconds is incremented once per second, until DHCP successfully 
completes.

7. The following message displays while the TFTP or HTTP process is invoked:

The number increments once per second, until the TFTP or HTTP server responds.

8. The following message displays while the upgrade script downloads from the TFTP or 

HTTP server:

where n is the number of KBs that have been downloaded.

 

 

www.xxx.yyy.zzz 

n uri

46XXUPGRADE.SCR
n KB received