Avaya 4630SW Manuel D’Utilisation

Page de 114
4630/4630SW IP Telephone Options
Call Log Options
Issue  2.0   December 2003
8-7
Archiving the Call Log
8
The process of automatically archiving your Call Log protects this information in 
the event of a telephone failure. Your System Administrator generally specifies 
whether your phone will participate in automatic archiving, which occurs every two 
hours (or according to a pre-determined time span your System Administrator 
establishes) when you have more than 50 log entries. 
You can determine if your phone is set for automatic archiving by checking the 
setting appearing next to the Automatic Archive button on the Call Log Options 
and Preferences screen. If the status is “Yes,” the phone is set up for automatic 
archiving; if the setting is “No,” automatic archiving will not occur. If the setting is 
“Suspended,” you must provide an FTP Server IP Address before an archive can 
automatically occur; the IP Address indicates the server on which archived data is 
saved. 
NOTE:
See the procedure in this section titled 
 for more information on adding or updating the FTP Server IP 
Address.
Before performing this procedure, first check with your System Administrator for 
information on how he or she has set up your telephone system’s archiving 
routine. Also check the message appearing under the FTP Setup button on the 
Call Log Options and Preferences screen to determine if there are any existing 
conditions that would prevent an automatic archive from occurring or to verify the 
status of automatic archiving, if this option is already set to “Yes.” Discuss any 
such messages with your System Administrator before proceeding.
1. With your System Administrator’s approval to proceed, select Automatic 
Archive from the Call Log Options and Preferences screen.
The Call Log Automatic Archive screen displays. The current archive option 
is highlighted.
2. Select either Yes or No, to indicate whether or not you want automatic 
archiving of your Call Log to occur every two hours (or at another pre-set 
interval determined by the System Administrator).
3. To save your selection, select Save. To exit without making a change, 
select Cancel.
The Call Log Options and Preferences screen re-displays.