Avaya 555-233-784 Manuel D’Utilisation

3. Choose one of the following: 

4. Press # to restart the phone or * to terminate the restart and restore the phone to its 

previous state. 

Note:

Any reset/restart of your phone may take a few minutes. 

Use the power cycle with your System Administrator’s approval. Use power cycling only if the 
basic or programmed reset procedure cannot be performed or does not correct the problem:

1. Unplug the phone and plug it back in. 

The phone connection is re-established. 

2. If power-cycling does not correct the problem, your System Administrator can perform a 

more severe power cycle routine by unplugging both the phone and the Ethernet cables.

!

WARNING:

Because the type of power cycle mentioned in Step 

 involves reprogramming 

certain values, Step 

 should only be performed by your System Administrator.

Reset the phone without 
resetting any assigned 
values. 

Press * (asterisk). 
A confirmation tone sounds and the display prompts 
“Restart phone? * = no # = yes.” 

Reset the phone and any 
previously assigned 
(programmed) values 
(Use this option only if your 
phone has prog.rammed, 
static values).

Press # (the pound key). 
The display shows the message “Resetting values” 
while your IP telephone resets its programmed 
values, such as the IP Address, to its default values, 
and re-establishes the server connection. The display 
then prompts “Restart phone? * = no # = yes.”