Avaya 8400-SES Manuel D’Utilisation

 

CRK; Reviewed: 
SPOC 7/1/2011 

Solution & Interoperability Test Lab Application Notes 

©2011 Avaya Inc. All Rights Reserved. 

20 of 21 

Polycom8400-SES 

 

</PHONE_CONFIG> 

 

The following steps may be used to verify the configuration:  

  Verify that SpectraLink 8400 Series successfully registers with SIP Enablement Services 

server by following the Users  Registered Users link on the SES Administration Web 
Interface.  

  Place calls to and from SpectraLink 8400 Series and verify that the calls are successfully 

established with two-way talk path.  

  While calls are established, Enter status trunk <t:r> command, where t is the SIP trunk 

group configured in Section 5.6, and r is trunk group member.  This will verify whether 
the call is shuffled or not. 

SpectraLink 8400 Series was compliance tested with Communication Manager (Version 5.2.1) 
and SIP Enablement Services (Version 5.2.1).  SpectraLink 8400 Series (UCS 4.0.0.10555) 
functioned properly for feature and serviceability.  During compliance testing, SpectraLink 8400 
Series successfully registered with SIP Enablement Services, placed and received calls to and 
from SIP and non-SIP telephones, and executed other telephony features like three-way 
conference, transfers, hold, etc. 

The following Avaya product documentation can be found at 

[1] Administering Avaya Aura™ Communication Manager, Release 5.2, Issue 5.0, May 2009, 
Document Number

 

03-300509

.  

[2] Administering Avaya Aura™ SIP Enablement Services on the Avaya S8300 Server, Issue 2.0, 
May 2009, Document Number 03-602508.

 

 
The following document was provided by Polycom SpectraLink. 
[3] Polycom® SpectraLink® 8400 Series Wireless Handset User Guide, February 2011, 1725-
36720-001 Rev A