Avaya 9040 Manuel D’Utilisation
Introduction
Page 4
4400, 4600, 6400 & TransTalk MDW 9040 Telephones
Page 4
IP Office
40DHB0002USAL - Issue 7 (2nd October 2003)
TransTalk
®
MDW 9040
The TransTalk
®
MDW 9040 set is a wireless set that can be used with the
system. It is plugged into a DS port on either the base Control Unit or a
DS expansion module. When using the set, the user must configure it to
work with the system, by defining the button map to be used. This can be
done by going to the set and pressing the Menu button, then using the
arrow button to select Configuration, then Button Map and then selecting
Merlin Magix.
Although the TransTalk
DS expansion module. When using the set, the user must configure it to
work with the system, by defining the button map to be used. This can be
done by going to the set and pressing the Menu button, then using the
arrow button to select Configuration, then Button Map and then selecting
Merlin Magix.
Although the TransTalk
®
MDW 9040 has a Menu
button, this button is
local to the set and is used for features local to the set. For this reason,
when using this set, an administrator must program the buttons for the
user. Features can also be accessed on these sets via shortcodes.
when using this set, an administrator must program the buttons for the
user. Features can also be accessed on these sets via shortcodes.