ZyXEL Communications p-2612HNU-FX Manuel D’Utilisation

 Chapter 5 WAN Setup

P-2612HNU-Fx User’s Guide

Use this screen to create a new layer-2 interface. At the time of writing, you can 
configure only one Ethernet layer-2 interface on the ZyXEL Device. However, you 
can create multiple ATM layer-2 interfaces. The screen varies depending on the 
interface type you selected in the previous section. 

Click Add in the Network > WAN > Layer 2 Interface screen to open the 
following. 

Figure 16   Network > WAN > Layer 2 Interface: Ethernet WAN Interface 

Configuration 

Figure 17   Network > WAN > Layer 2 Interface: DSL ATM Interface Configuration  

Note: VLAN MUX Mode is not supported by the ZyXEL Device as of writing.

Add

Click this button to create a new 

layer-2 

interface.

Remove

Check Remove and click this to delete this interface from the ZyXEL 
Device. A window displays asking you to confirm that you want to 
delete the interface.

Table 10   Network > WAN > Layer 2 Interface