ZyXEL Communications p-2612HNU-FX Manuel D’Utilisation

Chapter 7 Wireless LAN

P-2612HNU-Fx User’s Guide

This screen allows you to enable or disable wireless quality of service.

Click Network > Wireless LAN > QoS. The following screen displays.

Figure 40   Network > Wireless LAN > QoS

Encryption Type

Select TKIP to enable Temporal Key Integrity Protocol (TKIP) security 
on your wireless network. Use this if the other access points on your 
network support do not have an AES option.

Select AES to enable Advanced Encryption System (AES) security on 
your wireless network. AES provides superior security to TKIP. Use 
AES if the other access points on your network support it.

Select TKIPAES MIX to allow both TKIP and AES types of security in 
your wireless network.

Radius

Server IP 

Address

Enter the IP address of the external authentication server in dotted 
decimal notation.

Server Port

Enter the port number of the external authentication server. The 
default port number is 1812. 

You need not change this value unless your network administrator 
instructs you to do so with additional information. 

Share Secret

Enter a password (up to 31 alphanumeric characters) as the key to be 
shared between the external authentication server and the ZyXEL 
Device.

The key must be the same on the external authentication server and 
your ZyXEL Device. The key is not sent over the network. 

Apply

Click this to save your changes back to the ZyXEL Device.

Reset

Click this to reload the previous configuration for this screen.

Table 28   Network > Wireless LAN > Security: WPA/WPA2