ZyXEL Communications p-2612HNU-FX Manuel D’Utilisation

Chapter 16 Static Route

P-2612HNU-Fx User’s Guide

Use this screen to view and configure IP static routes on the ZyXEL Device. Click 
Advanced > Static Route to open the Static Route screen. 

Figure 78   Advanced > Static Route

The following table describes the labels in this screen. 

Table 59   Advanced > Static Route

Add

Click this to go to the screen where you can set up a static route on the 
ZyXEL Device.

#

This is the number of an individual static route.

Active

This indicates whether the rule is active or not.

You can change this in the Modify screen (

).

Status

This shows whether the rule is currently in use or not. 

Name

This is the name that describes or identifies this route. 

Destination

This parameter specifies the IP network address of the final destination. 
Routing is always based on network number. 

Subnet Mask

This parameter specifies the IP network subnet mask of the final 
destination.

Gateway

This is the IP address of the gateway. The gateway is a router or switch 
on the same network segment as the device's LAN or WAN port. The 
gateway helps forward packets to their destinations.

Modify

Click the Edit icon to go to the screen where you can set up a static route 
on the ZyXEL Device.

Click the Remove icon to remove a static route from the ZyXEL Device. A 
window displays asking you to confirm that you want to delete the route.