ZyXEL Communications p-2612HNU-FX Manuel D’Utilisation

Chapter 21 Logs

P-2612HNU-Fx User’s Guide

The following table describes the fields in this screen. 

This section provides descriptions of example log messages. 

Table 74   Maintenance > Logs > Log Settings

Syslog 
Logging

The ZyXEL Device sends a log to an external syslog server.

Active

Click Active to enable syslog logging. 

Syslog Server

Enter the server name or IP address of the syslog server that will log the 
selected categories of logs. 

UDP Port

Enter the port number used by the syslog server.

Active Log and Alert
Log

Select the categories of logs that you want to record.

Send 
Immediate 
Alert 

Select log categories for which you want the ZyXEL Device to send E-mail 
alerts immediately. 

Apply

Click this to save your customized settings and exit this screen. 

Cancel

Click this to return to the previously saved settings.

Table 75   Call Statistics Logs

Start Outgoing Call [SIP 

Number]

Someone used a phone to make an outgoing call.

rx pkts %d,rx bytes %d,lost 

pkts %d,avg jitter %d,tx 

pkts %d,tx bytes %d

Display the RTP packets status.

In Call End [SIP 

Number],Duration: Seconds

Incoming call from SIP number has terminated. Show 
the call duration.

Out Call End [SIP 

Number],Duration: Seconds

Outgoing call from SIP number has terminated. Show 
the call duration.

Incoming Call Established 

[SIP Number]

Incoming call from SIP number has been established.

Outgoing Call Established 

[SIP Number]

Outgoing call to SIP number has been established.