ZyXEL Communications P-2602R/RL-DXA Manuel D’Utilisation
P-2602R/RL-DxA Quick Start Guide
3
2.1 P-2602RL-DxA Hardware Connections
1 DSL: Use the gray ADSL cable to connect the telephone jack or the DSL or MODEM jack on a splitter to
this port.
2 LINE: Use the green PSTN line cable to connect the telephone jack or the TEL or PHONE jack on a splitter to
this port.
Note: When the P-2602R/RL-DxA does not have power, only the phone connected to the
PHONE 2 port can be used for making calls. Ensure you know which phone this is, so
that in case of emergency you can make outgoing calls.
that in case of emergency you can make outgoing calls.
3 ETHERNET: Use an Ethernet cable to connect a computer to this port for initial configuration and/or
Internet access.
4 PHONE 1-2: Use telephone cables (and any telephone adaptors provided with your P-2602RL-DxA) to
connect your telephones to these ports. If you only have one telephone, you should use port 1.
5 POWER: Use the power adaptor provided with your P-2602RL-DxA to connect an appropriate power
source to this socket.
Note: If you are using T-ISDN (UR-2), connect the green wire to a TAE connector before connecting it
to a telephone wall jack or the telephone splitter's TEL or PHONE jack.