Avaya 7940 Manuel D’Utilisation
19
© 2006 Avaya Inc. All rights reserved.
Additional Configuration Notes (Upgrading from very old
Cisco SIP releases)
Cisco SIP releases)
•There are incremental firmware steps required when upgrading from older
SIP/SCCP firmware releases (pre 5.3) to the currently supported 7.4 SIP firmware
release. For example, SCCP firmware version 5.0(4.0) to SIP 7.4 in this case.
SIP/SCCP firmware releases (pre 5.3) to the currently supported 7.4 SIP firmware
release. For example, SCCP firmware version 5.0(4.0) to SIP 7.4 in this case.
•Note, if you have statically configured the IP parameters for your 7960/7940 sets
(vs. using DHCP), these static values will be erased and have to be re-entered
during the first part of the upgrade process from your current pre 5.3 firmware to
5.3. When Upgrading from SIP 5.3 to SIP 7.4, the static parameters are retained,
however.
(vs. using DHCP), these static values will be erased and have to be re-entered
during the first part of the upgrade process from your current pre 5.3 firmware to
5.3. When Upgrading from SIP 5.3 to SIP 7.4, the static parameters are retained,
however.