Avaya 16-601443 Manuel D’Utilisation

PROCPSWD

" " (Null)

Text string containing the local (dialpad) procedure 

password (Null or 1-7 ASCII digits). If set, password 

must be entered immediately after Mute is pressed and 

before entry of a procedure command (for example, 

VIEW). Intended to facilitate restricted access to local 

procedures even when command sequences are 

known. Password is viewable, not hidden.

PROCSTAT

0

Local (dialpad) Administrative procedures status 

(0=Local procedures enabled, 1=all Administrative 

Options are disabled).

REREGISTER

20

Registration timer in minutes. Controls an H.323 

protocol timer that should only be changed under very 

special circumstances by someone who fully 

understands the system operation impact. Value is 

1-120.

RTCPMON

" " (Null)

Text string containing the 4-octet IP address of the 

RTCP monitor currently in use, in dotted decimal or 

DNS Name format (0-15 ASCII characters, no spaces).

SNMPADD

" " (Null)

Text string containing zero or more allowable source IP 

addresses for SNMP queries, in dotted decimal or DNS 

format, separated by commas, with up to 255 total 

ASCII characters including commas.

SNMPSTRING

" " (Null)

Text string containing the SNMP community name 

string (up to 32 ASCII characters, no spaces).

STATIC

0

Static programming override flag. If set to “0” static 

programming never overrides call server (DHCP) or 

call server administered data. If set to “1” static 

programming overrides only file server administered 

data. If set to “2” static programming overrides only call 

server administered data. If set to “3” static 

programming overrides both file server- and call 

server-administered data. Allows a call server IP 

address that has been manually programmed into a 

telephone to override any value received via DHCP or 

via this configuration file. A manually programmed IP 

address will only be used if it is not 0.0.0.0, so this 

parameter may be used to allow only specific 

telephones to use a different value than otherwise 

provided by this configuration file. If STATIC is to be 

used to select a manual override of file server IP 

address(es), STATIC must be set via DHCP, not via 

this configuration file.

SUBSCRIBELIST

" " (Null)

One or more Push application server subscription 

URLs, separated by commas without any intervening 

spaces (0-255 ASCII characters, including commas).