Avaya 16-601443 Manuel D’Utilisation

L2Q, L2QVLAN, 

L2QAUD, 

L2QSIG,
DSCPAUD, 

DSCPSIG

MED Network 

Policy TLV

L2Q - set to “2” (off) If T (the Tagged Flag) is set to 

0; set to “1” (on) if T is set to 1. 
L2QVLAN - set to the VLAN ID in the TLV.
L2QAUD and L2QSIG - set to the Layer 2 Priority 

value in the TLV. 
DSCPAUD and DSCPSIG - set to the DSCP value 

in the TLV. 
A check is made as to whether a reset is necessary 

to obtain a new IP address due to a change in the 

values of the parameters L2Q or L2QVLAN. 

This TLV is ignored if:

●

the value of USE_DHCP is “0” and the value 

of IPADD is not “0.0.0.0”, or

●

the Application Type is not 1 (Voice) and is 

not 2 (Voice Signaling), or

●

the Unknown Policy Flag (U) is set to 1.

MCIPADD

Proprietary Call 

Server TLV

MCIPADD will be set to this value if it has not 

already been set.

TLSSRVR and 

HTTPSRVR 

Proprietary File 

Server TLV 

TLSSRVR and HTTPSRVR will be set to this value 

if neither of them have already been set.

L2Q

Proprietary 802.1

Q Framing 

The default L2Q is set to the value of this TLV. No 

change is made to the current L2 tagging, but the 

new default value is used on the next reboot. If TLV 

= 1, L2Q set to "1" (On). If TLV = 2, L2Q set to "2" 

(Off). If TLV = 3, L2Q set to "0" (Auto).

Proprietary - PoE 

Conservation TLV

This proprietary TLV can initiate a power 

conservation mode. The telephones that support 

this will turn on/off the telephone backlight and the 

backlight of an attached Button Module in response 

to this TLV. 

Extended 

Power-Via-MDI

Power conservation mode will be enabled if the 

received binary Power Source value is 10, and 

power conservation mode will be disabled if the 

received binary Power Source value is not 10.

Power conservation mode is enabled even if the 

telephone is not powered over Ethernet because 

the telephone sends information about the power 

source that it is using in a TIA LLDP MED Extended 

Power-Via-MDI TLV; it is assumed that the power 

management system intends to conserve local 

power as well.