Avaya 5620SW + EU24 Manuel D’Utilisation

Page 38 - Function Key Features 

Function Keys 

Page 38 - Function Keys 

IP Office (R3.0) 5620SW + EU24 User’s Guide 

Function Key Features 

40DHB0002USEP – Issue 1 (13th January 2005) 

Clears a current calls.  

This function does not require any data entered when programmed. This function can 
be programmed through the phone by the user using an 

Admin key.  

For a call in progress, pressing 

 Drop disconnects the caller.  

When drop is used, silence is returned to the user rather than dial tone. This is 
intended operation, reflecting that Drop is mainly used by call center headset users.  
 

[User | Digital Telephony | Emulation | Drop]  
 

Return secondary dial tone to the user.  

This function is currently not supported on the 5620 telephone. 
 

Dials a specified number regardless of any call barring applied to the user.  

This function requires entry of a number to dial when programmed. That number is 
then shown next to Emrgy. This function cannot be programmed through the phone by 
the user.  

[User | Digital Telephony | Advanced | Dial | Dial Emergency] 

  

Send a hook flash signal to the currently connected line.  

This function does not require any data entered when programmed. This function 
cannot be programmed through the phone by the user. This function can be 
programmed through the phone by the user using an 

 Admin 1 key.  

 

[User | Digital Telephony | Advanced | Miscellaneous | Flash Hook] 

 

Forwards calls from this extension to the specified target.  

This function requires the target extension to be entered when programmed. The 
extension number is then shown next to FolTo. This function cannot be programmed 
through the phone by the user.  

Pressing 

 FolTo sets the extension's Follow Me To number to the specified 

extension and switches follow me use on. Whilst on, FolTo is shown with a   symbol. 
Press 

 FolTo again to switch off.  

 

[User | Digital Telephony | Advanced | Follow Me | Follow Me To]