Aastra Telecom 9480i CT Series Manuel D’Utilisation

41-001160-03, Rev 00, Releaes 2.4

4-55

Configuring Network and Session Initiation Protocol (SIP) Features

The following parameters allow an administrator to configure ToS, QoS, and 
DiffServ QoS for VLAN:

tagging enabled

VLAN enable

priority non-ip

Priority, Non-IP Packet

vlan id

VLAN ID

tos priority map

SIP Priority

tos priority map

RTP Priority

tos priority map

RTCP Priority

vlan id port 1

VLAN ID

QoS eth port 1 priority

Priority

In order for the software to successfully maintain connectivity with a 

network using VLAN functionality, the IP phone reboots if you modify 
the "tagging enabled" (VLAN Enable in the Web UI), "vlan id", or 
"vlan id port 1" parameters.

When the LAN Port (vlan id) and the PC Port (vlan id port 1) 

parameters have the same value, VLAN functionality is compatible with 
earlier IP phone software releases.

If you set the PC Port (vlan id port 1) to 4095, all untagged packets are 
sent to this port. For configuring this feature via the Phone UI and the 
Aastra Web UI, see 

 on 

. For 

configuring this feature using the configuration files, see Appendix A, the 
section, 

 on 

Draft 1