Avaya 1600 Series Manuel D’Utilisation

10.  Enter a valid value between 0 and 999 for the new value of the DHCPOFFER wait period.

The telephone displays:

11. Press the # button to save the new values you entered.

The telephone displays:

Once the new values are stored, the telephone is reset.

If a new boot program is downloaded from the HTTP server after you enter static 
addressing information, you must reenter your static addressing information.

Use the following procedure to enable or disable logging of system events.

1. While the telephone is on-hook and idle, press the following sequence of keys on the 

faceplate of the telephone:

Mute 5 6 4 # (Mute L O G #) 

Note:

Press the Mute button momentarily. Do not press this button while pressing other 
keys/buttons. 

2. After entry of the command sequence, the telephone displays the following text, depending 

on the current value of the system parameter NVLOGSTAT:

where status is the type of logging indicated by the NVLOGSTAT value, defined as:

●

Status is disabled when NVLOGSTAT = 0

●

Status is emergencies when NVLOGSTAT = 1

●

Status is alerts when NVLOGSTAT = 2

●

Status is critical when NVLOGSTAT = 3

●

Status is errors when NVLOGSTAT = 4

●

Status is warnings when NVLOGSTAT = 5

*=no #=yes 

being saved 

Log=status 

*=change #=OK