Avaya 3645 Manuel D’Utilisation

15

Getting Started

Your Avaya 3641/3645 Wireless IP Telephone is designed for full mobility 

within the workplace and operates much like a cell phone. It also interfaces 

with the telephone system at your workplace and incorporates advanced 

telephony features. This section covers the basic functions available in 

every facility. For specific telephony system functions, see the Facility-

Specific Features section or contact your system administrator.

The handset’s Battery Pack must be charged charged for a minimum of 

two hours before its first use. See the section Handset Accessories for 

complete information about charging your handset.

The Battery Pack icon on the status line of the display gives you a visual 

indication of the amount of charge remaining in the Battery Pack. Addi-

tionally, when the icon shows empty, if the handset is in standby mode, 

you will hear a brief, modulated-ring signal and the 

Battery Low

 mes-

sage displays. The handset may not be used until charged. If you are in a 

call, soft beeps will sound, first slow and then fast, until the handset 

becomes unusable. When you first start to hear the beeps, you have two 

minutes to end the call or change the Battery Pack.
The Battery Pack can be changed while the call is still in progress. Do not 

press 

END

. Quickly remove the discharged Battery Pack and replace with 

a charged Battery Pack, press 

END

 to turn the handset back on and then 

press 

START

 to resume the call.

See the Handset Accessories section for complete information about 

chargers.

21-601633_1.book  Seite 15  Freitag, 13. Juli 2007  4:42 16