Aastra Telecom 6755i Manuel D’Utilisation

146

Model 6755i IP Phone User Guide

 

14. In the “Value” field, enter a multicast IP address and a port number for the Paging key. 

When you press this key, the phone initiates an outgoing multicast RTP session to the 
specified address using the specified port. (For example, 239.0.1.15:10000).

15. To receive RTP steams for Group Paging, you must also configure the "Paging Listen 

Addresses" parameter at the path, Basic Settings->Preferences->Group Paging RTP 
Settings. For more information about setting this parameter, see 

.

16. Click 

 to save your changes

The following procedure describes the use of the Paging key on the IP Phone. The procedure 
assumes you have already configured the Paging key using the Aastra Web UI.

1. On the IP Phone, press the softkey, programmable key, or expansion module key you 

configured for Paging (labeled as “Group 1” in the following illustration).

Notes: 
1. When you select Paging for the “Type” field, the “Line” field is disabled.

2. The “Value” field allows for one multicast address entry only.

Notes: 
1. Recipient of a Paging call can set a global “Do Not Disturb” (DND) to ignore 
any incoming pages.

2. For incoming Paging, the phone uses the Intercom configuration settings. The 
incoming Page is dependant on the “Allow Barge-In” parameter setting and the 
“Idling/On Call” state.

Tues Jan1 10:00am

Services
Dir
Callers

Icom

Group 1

LAB

ACD