Avaya 700217243 Manuel D’Utilisation

Page de 106
 6 Maintaining Your System
62
Upgrading 1600 DSL and 012E Module Firmware
Quick Reference Guide
11
Tighten the screw on the lower front of the cover.
Upgrading 1600 DSL and 012E Module 
Firmware
PARTNER ACS Release 5.0 or later provides a firmware upgrade capability for 
the 1600 DLS and 012E modules which are equipped with programmable flash 
memory. The firmware to upgrade these modules can reside on either a Remote 
Access PC Card or on a Backup/Restore PC Card. 
When configured for firmware upgrades, the Remote Access PC Card can 
contain system software as well as firmware upgrade software while the 
Backup/Restore PC Card contains just the firmware upgrade software. 
The steps to perform a firmware upgrade are the same as those to upgrade the 
system software. See 
Check the LEDs
While a 1600 DSL or 012E module is undergoing a firmware upgrade, the power 
LEDs appear as follows:
• The power LED on the 1600 DSL and/or the 012E module is initially steady 
green for 10 to 20 seconds, then flashes for another 5 to 10 seconds.
• The LED on the processor module flashes green while the firmware 
upgrade is in progress.
• The LEDs on other modules residing in the carrier that are not being 
upgraded are off.
Some modules do not display the LED off during a firmware 
upgrade of other modules. The power LED on the 1600 DSL 
module is steady green and the power LED on the PARTNER 
Messaging module is steady amber while firmware is upgraded on 
other modules.