Shiro SK7711 Manuel D’Utilisation
25
Resetting the system
If you have set a PIN and forgotten it, you need to reset the system. The PIN will be reset to
0000. If you reset the system, you will lose all stored information (including numbers in
memory) and all features will return to their default settings. You need to register the handset
to the base unit again.
While you are resetting the system, you should disconnect the telephone line cord from the
back of the base unit, so you won't be interrupted by incoming calls. To reset the system
without the PIN:
1. Disconnect the power lead from the back of the base unit
2. Press and hold the
HANDSET LOCATOR button in the base unit, at the same time
connect the power lead into the back of base unit. Release the
LOCATOR button
after you hear “beep” sound for five times. The IN USE light on base unit lights
during this whole process.
3. After 2~3 seconds, you can hear “beep” sound for two times again and the IN USE
light goes off;
4. Disconnect the power lead from base. Reconnect and you will hear a confirmation
tone from the base unit.
Intercom and transfer
To Make an Intercom Call
1. Press the INT key. You will hear Dial tone;
2. Key in the number of the other handset
3. On the other handset's display, your number appears, and the INT symbol flashes.
Then the other handset user presses the Call button to connect the call.
For details of how to change the ringing melody and volume for intercom calls, see "INT
MELODY" and "INT VOLUME" under "HANDSET SETTING" part.
To End an Intercom Call
• Press the Call button on your handset. The other person will hear Busy tone, and also
need to press the End button to hand up.
To transfer the outside call to another handset
(
if you have two or more
handsets):
1. Press the INT key and key in the number of the other handset.
2. The outside call is put on hold. When the other handset answers, you can speak to the
user. If the other handset does not answer, you can get back to the outside call by
pressing the INT button again.