Mitel 5312 IP Manuel D’Utilisation

 

5312/5324 IP Phones User Guide 

1.  Lift the handset (optional). 

2.  If you want to use a Non–Prime Line, press a Line Appearance key. 

3.  Do one of the following: 

•  Dial the number  
•  Press a Speed Call key  
• Press 

 

 ( REDIAL ).  

Do one of the following:  

•  Lift the handset.  

• Press 

   ( SPEAKER ).  

•  Press the flashing Line appearance key and lift the handset.  
•  Press the flashing Line appearance.  

Warning for emergency number dialing: Consult your local authorities for Emergency Numbers 
and 911 or equivalent service availability in your area. There are two methods of dialing emergency 
numbers, based on the programming of your 3300 ICP:  

•  Emergency Call Routing NOT programmed  
•  Emergency Call Routing programmed    

Caution: Verify with your System Administrator which type of emergency number dialing you can 
use.  

If Emergency Call Routing is NOT programmed, Emergency Number dialing should only be 
performed by picking up the handset and selecting the Line Interface Module key you have 
programmed. If Privacy Mode is enabled and the Line Interface Module key local line is busy, dialing 
will not occur on the Line Interface Module line. Emergency dialing using an IP connection may not be 
supported due to ICP system configuration and country location. For more information, contact your 
System Administrator.  

To make an Emergency Call using the Line Interface Module line:  

1.  Lift the handset. 

2.  Press the Line Interface Module key that you have programmed. 

3.  The set indicates IP FAIL: ANALOG CALL  

4.  Dial your Local Emergency Number.