Panasonic KX-TVS80 Manuel D’Utilisation
D4
CUSTOMIZING THE MESSAGE MANAGER'S MAILBOX
MESSAGE MANAGER'S GUIDE
281
D4
CUSTOMIZING THE MESSAGE MANAGER'S
MAILBOX
The Message Manager is able to customize the Message Manager's Mailbox by specifying the
password and the extension numbers of Operator 1, 2, and 3.
password and the extension numbers of Operator 1, 2, and 3.
Note
While the System Administrator programs via a computer, this service cannot be accessed
and "Sorry, this function is not available." is played.
While the System Administrator programs via a computer, this service cannot be accessed
and "Sorry, this function is not available." is played.
Message Manager's Password
The password can be specified at any time using the telephone. The password contains up to 8
numeric characters and must be entered to execute the message management operation.
numeric characters and must be entered to execute the message management operation.
Operator's Extensions
When callers require help they are transferred to an operator extension after Pressing [0] on
their telephone keypad. Up to 3 operators (Operator 1, 2, 3) can be specified for both Day and
Night modes. The extension number assigned for Operator 1 in the Day Mode will be for the
Message Manager.
their telephone keypad. Up to 3 operators (Operator 1, 2, 3) can be specified for both Day and
Night modes. The extension number assigned for Operator 1 in the Day Mode will be for the
Message Manager.
1.
Log in the Main Menu.
2.
Press [3] to Customize Mailbox.
3.
The VPS plays the current password setting. Press [1] to change the password. If a
password has not yet been assigned, go to Step 4. Accept the current setting by Pressing [2].
password has not yet been assigned, go to Step 4. Accept the current setting by Pressing [2].
4.
Type the password and Press [#].
5.
The VPS repeats what was entered. Press [2] to accept the entry.
6.
The VPS plays the current operator's extension setting. Press [1] to change the operator's
extension. If the operator's extension is unassigned, go to Step 7. Accept the current setting
by Pressing [2].
extension. If the operator's extension is unassigned, go to Step 7. Accept the current setting
by Pressing [2].
7.
Type the extension number.
8.
The VPS repeats the extension entered. Press [2] to accept the entry.