Panasonic KX-TG2970 Manuel D’Utilisation

Connect the handset cord to the handset and the base unit, place the handset on 
the cradle, and then connect the AC adaptor and the telephone line cord.

• Base unit: USE ONLY WITH Panasonic AC ADAPTOR PQLV10 (Order No. 

PQLV10Z).

• Use Only a Panasonic Handset for the KX-TG2970.
• The AC adaptor must remain connected at all times. (It is normal for the adaptor to 

feel warm during use.)

• The AC adaptor should be connected to a vertically oriented or floor-mounted AC 

outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the 
weight of the adaptor may cause it to become disconnected.

• If your unit is connected to a PBX which does not support Caller ID, you cannot 

access Caller ID services.

• This unit will not function during a power failure, unless it is connected to the ADT 

Security System.

• If the unit is connected to a telephone line with DSL service, you may hear noise 

during conversations or the unit may not display caller’s name and/or phone 
number properly. We recommend connecting a noise filter (contact your DSL 
service provider) to the telephone line between the base unit and the telephone 
line jack.

*Noise Filter 

(For DSL users)

Handset

Handset Cord

Raise the antennas.

Telephone 

Line Cord

AC Adaptor

Power Outlet (AC 120 V, 60 Hz)

Single-Line Telephone Jack (RJ11C)

Fasten the AC adaptor cord 

to prevent it from being 

disconnected.

Hook

TG2970.book  Page 10  Friday, October 15, 2004  6:21 PM