Panasonic KX-TG2970 Manuel D’Utilisation

 

If you want to re-register the cordless handset to the base unit or a different base 
unit of the same model, you need to register it to that base unit. The cordless 
handset will be given a new extension number of that base unit. Only one cordless 
handset can be registered at a time. 
Make sure the base unit and the other cordless handsets are not being used. 
Have both the cordless handset and base unit nearby during registration.

• You can stop registration by pressing [OFF] on the cordless handset and pressing 

[MUTE] on the base unit.

If you have canceled handset registration at a previous base unit (p. 68), start 
from step 6. 

Cordless handset: Press [CONF/FUNCTION].

Cordless handset: 
Press [ ] at “Telephone”.

Cordless handset: 
Scroll to “Initial setting” by pressing 

[ ] or [ ], then press [ ].

Cordless handset: 
Scroll to “Registration” by pressing [ ] or 

[ ], then press [ ].

Cordless handset: 
Press [ ] at “HS registration”.

Base unit: Press [MUTE].

• The MUTE indicator flashes. After the MUTE indicator starts flashing, the 

rest of the procedure must be completed within 1 minute.

Cordless handset:
(1) Press the soft key (

)

.

(2) Wait until 3 beeps sound and the display 

shows the new extension number.

• Registration is complete.

If you have not canceled the cordless handset registration at the previous base 
unit (p. 68), the handset number still remains on that base unit memory. To erase 
the handset number from the previous base unit, perform the following steps by 
using the base unit: (1) Press [FUNCTION/EDIT], (2) Press [MUTE], (3) Enter 
“335#”, and (4) Enter that handset number (1 to 3). 3 beeps sound, then the 
handset number is erased from the base unit memory.

Telephone
Initial setting

Registration

HS registration

Press MUTE on

base unit, then

OK on handset to

register handset

  

SP

     

Handset [2]

   Registered

[2]

Ex. Extension number 2

TG2970.book  Page 69  Friday, October 15, 2004  6:21 PM