Manualsbrain.com
  1. Manuels
  2. Marques
  3. Panasonic
  4. KX-TG5456
  5. Manuel D’Utilisation

Panasonic KX-TG5456 Manuel D’Utilisation

Télécharger
Page de 76
Programmable Settings
For assistance, please visit http://www.panasonic.com/consumersupport
43
1
Press {MENU} (middle soft key).
2
Scroll to 
N, then press {SELECT}.
3
Scroll to “Set base unit”, then press 
{SELECT}.
4
Scroll to “Interrupt tone”, then 
press {SELECT}.
5
Press {V} or {^} repeatedly to select 
the desired setting.
6
Press {SAVE}, then press {OFF}.
Base unit Talking Caller ID 
You can turn the Talking Caller ID feature 
(page 26) on or off for the base unit.
This feature must be set by using the 
handset.
1
Press {MENU} (middle soft key).
2
Scroll to 
N, then press {SELECT}.
3
Scroll to “Set base unit”, then press 
{SELECT}.
4
Scroll to “Talking CallerID”, then 
press {SELECT}.
5
Press {V} or {^} repeatedly to select 
“On” or “Off”.
6
Press {SAVE}, then press {OFF}.
Re-registering the handset
If “No link to base. Move closer 
to base, try again.” is displayed 
even when the handset is near the base 
unit, you may need to re-register the 
handset to the base unit.
Important:
L Make sure the base unit is not being 
used.
L Have the handset and base unit near 
each other when re-registering the 
handset.
1
Handset:
Press {MENU} (middle soft key).
2
Scroll to 
N, then press {SELECT}.
3
Scroll to “Registration”, then press 
{SELECT}.
4
Base unit:
Press and hold {LOCATOR/
INTERCOM} until the CHARGE 
indicator flashes.
L After the CHARGE indicator starts 
flashing, the rest of the procedure 
must be completed within 1 minute.
5
Handset:
Press {OK} (right soft key), then wait 
until the handset beeps.
L Registration is complete.