Panasonic KXTG9382T Manuel D’Utilisation
Making/Answering Calls
18
For assistance, please visit http://www.panasonic.com/help
Making calls
Using the handset Y
1
Lift the handset and dial the phone number.
L
To correct a digit, press {CLEAR}.
2
{C}
L
An available line is automatically selected
and the line number is displayed. To change
the line selection mode, see page 17.
and the line number is displayed. To change
the line selection mode, see page 17.
L
You can also select the line manually by
pressing {LINE 1} or {LINE 2}.
pressing {LINE 1} or {LINE 2}.
3
When you finish talking, press {OFF} or place
the handset on the base unit or charger.
the handset on the base unit or charger.
Note:
L
The LINE1 indicator or LINE2 indicator on the
base unit lights up while using the handset.
base unit lights up while using the handset.
Using the speakerphone
1
During a conversation, press {s} to turn on
the speakerphone.
the speakerphone.
L
Speak alternately with the other party.
2
When you finish talking, press {OFF}.
Note:
L
For best performance, use the speakerphone in
a quiet environment.
a quiet environment.
L
To switch to the receiver, press {C}.
Using the base unit [
1
Dial the phone number.
L
To correct a digit, press {CLEAR}.
2
{
SP-PHONE}
L
An available line is automatically selected
and either the LINE1 indicator or LINE2
indicator lights up. To change the line
selection mode, see page 17.
and either the LINE1 indicator or LINE2
indicator lights up. To change the line
selection mode, see page 17.
L
You can also select the line manually by
pressing {LINE 1} or {LINE 2}.
pressing {LINE 1} or {LINE 2}.
3
When the other party answers, speak into the
MIC.
MIC.
L
Speak alternately with the other party.
4
When you finish talking, press {SP-PHONE}.
Note:
L
For best performance, use the speakerphone in
a quiet environment.
a quiet environment.
L
While on a call, you can switch from the base
unit to the handset:
unit to the handset:
– Press {LINE 1} or {LINE 2} on the handset to
select the line that is being used by the base
unit, then press {SP-PHONE} on the base
unit.
unit, then press {SP-PHONE} on the base
unit.
– If the handset is on the base unit, lift the
handset then press {LINE 1} or {LINE 2} on
the handset within 3 seconds to select the line
that is being used by the base unit.
the handset within 3 seconds to select the line
that is being used by the base unit.
Adjusting the receiver or speaker
volume
volume
Press {^} or {V} repeatedly while talking.
Making a call using the redial list
The last 10 phone numbers dialed are stored in the
redial list in each unit (each 48 digits max.).
redial list in each unit (each 48 digits max.).
1
{
REDIAL}
2
{V}
/{^}: Select the desired phone number.
3
Proceed with the operation for your unit.
Handset: {C}
Base unit: {SP-PHONE}
Handset: {C}
Base unit: {SP-PHONE}
Erasing a number in the redial list
1
{
REDIAL}
2
{V}
/{^}: Select the desired phone number.
i {ERASE} (soft key)
3
{V}
/{^}: “Yes” i {SELECT}
4
Proceed with the operation for your unit.
Handset: {OFF}
Base unit: {
Handset: {OFF}
Base unit: {
■} (EXIT)
Pause (for PBX/long distance service
users)
users)
A pause is sometimes required when making calls
using a PBX or long distance service. When
storing a calling card access number and/or PIN in
the phonebook, a pause is also needed (page 24).
using a PBX or long distance service. When
storing a calling card access number and/or PIN in
the phonebook, a pause is also needed (page 24).
Example: If you need to dial the line access
number “9” when making outside calls with a PBX:
number “9” when making outside calls with a PBX:
Y Handset / [ Base unit
Y Handset / [ Base unit
Y Handset / [ Base unit
TG938x(e).book Page 18 Friday, July 3, 2009 10:10 AM