Panasonic KX-TCD961CXB Manuel D’Utilisation
Chapter 1
Preparation
15
Ex. MEDIUM is selected.
Selecting the Base Unit Ringer Volume/Pattern
You can program the desired base unit ringer volume and pattern.
Make sure that the power is ON (p. 13) and the unit is in the stand-by mode.
Make sure that the power is ON (p. 13) and the unit is in the stand-by mode.
1
Press then .
2
Press TWICE.
•
The current volume is displayed.
1: LOW 2: MEDIUM 3: HIGH
0: OFF
1: LOW 2: MEDIUM 3: HIGH
0: OFF
2
I N T
3
Press the desired volume level
,
,
or .
•
Each time you press a button, the selected
volume is displayed and rings.
volume is displayed and rings.
4
Press .
•
A confirmation tone sounds and the display
will return to the stand-by mode.
will return to the stand-by mode.
0
3
2
1
22
u
2
Ringer volume
3 levels (HIGH, MEDIUM, LOW) are available.
The factory preset is MEDIUM. When set to
OFF, the base unit will not ring.
The factory preset is MEDIUM. When set to
OFF, the base unit will not ring.
1
Press then .
2
Press then .
•
The current ringer pattern is displayed.
3
Press the desired ringer pattern
to
.
•
Each time you press a button, the selected
pattern is displayed and sounds.
pattern is displayed and sounds.
4
Press .
•
A confirmation tone sounds and the
display will return to the stand-by mode.
display will return to the stand-by mode.
6
1
3
2
I N T
23
U
i
Ringer pattern
You can program the desired handset ringer
pattern (6 patterns). The factory preset is
pattern 1.
pattern (6 patterns). The factory preset is
pattern 1.
Ex. Pattern 1 is selected.
KX-TCD961CXB(06~16) 99.12.3 2:04 PM Page 15