Panasonic kx-tg1805al Manuel D’Utilisation
Preparation
11
L
This unit is not designed to be used with
rotary (pulse dialling) services.
rotary (pulse dialling) services.
Battery installation
1
Insert the batteries negative (T)
terminal first.
terminal first.
2
Close the handset cover.
Note:
L
Use only rechargeable batteries (page 4).
Battery charge
Place the handset on the base unit for
about 7 hours before initial use.
When charging, the battery icon is shown as
follows.
about 7 hours before initial use.
When charging, the battery icon is shown as
follows.
When the batteries are fully charged, 5
remains on the display.
remains on the display.
Note:
L
It is normal for the handset to feel warm
during charging.
during charging.
L
It takes 7 hours to fully charge the
batteries, however, you can use the
handset before the batteries are fully
charged.
batteries, however, you can use the
handset before the batteries are fully
charged.
L
Clean the charge contacts (page 9) of the
handset and base unit with a soft, dry
cloth once a month, otherwise the
batteries may not charge properly. Clean
more often if the unit is exposed to grease,
dust or high humidity.
handset and base unit with a soft, dry
cloth once a month, otherwise the
batteries may not charge properly. Clean
more often if the unit is exposed to grease,
dust or high humidity.
Battery strength
Note:
L
When 7 flashes, recharge the handset
batteries. 7 will continue to flash until
the batteries have been charged for at
least 15 minutes.
batteries. 7 will continue to flash until
the batteries have been charged for at
least 15 minutes.
Battery icon
Battery strength
5
High
6
Medium
7
Low
When flashing: Needs
to be charged.
When flashing: Needs
to be charged.
TG1805AL(e-e).book Page 11 Thursday, March 17, 2005 9:37 AM