Panasonic KX-TCD500NZ Manuel D’Utilisation
36
Handset Settings
Setting the Ringer Volume
The choices are 6 levels and off. If you set the volume to OFF, “
” is displayed,
however, the paging and intercom call volumes will be at level 1.
• The factory preset is 6.
Selecting the Ringer Pattern for External Call/Internal Call/Paging
• The factory preset is 1.
Selecting the Ringer Pattern for Private Ring
• The factory preset of each ringer pattern is 1.
1
Press JOYSTICK
(or move).
(or move).
2
Select “
Ringer
Option
”.
3
Select “Ringer
Volume
Volume
”.
4
To increase volume, move the JOYSTICK up.
To decrease volume, move the JOYSTICK down.
To decrease volume, move the JOYSTICK down.
5
Press JOYSTICK.
Follow steps 1 to 2 shown above, then:
3
Select “EXT Ringer Type”, “INT
Ringer Type
Ringer Type
” or “Paging Tone”.
4
Select the desired ringer pattern.
Follow steps 1 to 2 shown above, then:
3
Select “Private
Ring
Ring
”.
4
Select the desired
category.
category.
5
Select the desired
ringer pattern.
ringer pattern.
500NZ_e.book Page 36 Monday, July 7, 2003 4:19 PM