Panasonic KX-TCD560NZ Manuel D’Utilisation
Useful Telephone Settings
29
Base unit settings
Adjusting ringer volume
1
1
Press $ (centre of joystick).
2
Select u, then press ,.
3
Enter “0000” (default base unit PIN).
L
L
If you changed the PIN, enter it (page
30).
30).
4
Press , 2 times.
5
Push the joystick up or down repeatedly
to select the desired volume.
to select the desired volume.
6
Press ,.
7
Press {ih}.
Call Options
Changing the recall mode
Change the recall mode, if necessary,
depending on the requirements of your
service provider or PBX.
“Type 1”: 100 ms
“Type 2”: 600 ms
“Type 3”: 200 ms
Change the recall mode, if necessary,
depending on the requirements of your
service provider or PBX.
“Type 1”: 100 ms
“Type 2”: 600 ms
“Type 3”: 200 ms
1
Press $ (centre of joystick).
2
Select u, then press ,.
3
Enter “0000” (default base unit PIN).
L
L
If you changed the PIN, enter it (page
30).
30).
4
Select “Call Option”, then press
,
,
.
5
Select “Recall”, then press ,.
6
Select the desired setting, then press
,
,
.
7
Press {ih}.
Setting pause length
Change the pause length, if necessary,
depending on the requirements of your
service provider or PBX.
“Short”: 3 sec.
Change the pause length, if necessary,
depending on the requirements of your
service provider or PBX.
“Short”: 3 sec.
“Long”: 5 sec.
1
Press $ (centre of joystick).
2
Select u, then press ,.
3
Enter “0000” (default base unit PIN).
L
L
If you changed the PIN, enter it (page
30).
30).
4
Select “Call Option”, then press
,
,
.
5
Select “Pause Time”, then press
,
,
.
6
Select the desired setting, then press
,
,
.
7
Press {ih}.
Storing/changing emergency numbers
These settings determine which phone
numbers can be dialled while the call bar
feature is on (page 25).
These settings determine which phone
numbers can be dialled while the call bar
feature is on (page 25).
1
Press $ (centre of joystick).
2
Select u, then press ,.
3
Enter “0000” (default base unit PIN).
L
L
If you changed the PIN, enter it (page
30).
30).
4
Select “Call Option”, then press
,
,
.
5
Select “Emergency Call”, then press
,
,
.
6
Select a memory location, then press
,
,
.
L
If the memory location already
contains an emergency number, the
number is displayed.
contains an emergency number, the
number is displayed.
7
Enter/edit the number, then press ,.
8
Press {ih}.
Note:
L
The default setting for emergency
numbers are stored in the first 3 memory
locations. It is recommended that you do
not overwrite these numbers.
numbers are stored in the first 3 memory
locations. It is recommended that you do
not overwrite these numbers.
KX-TCD560-580NZ(e).book Page 29 Tuesday, July 6, 2004 10:49 AM