Perreaux SXV2 Manuel D’Utilisation
6
1
1
1
1
Unpacking and Placement
Unpacking
Procedure
The SXV2 is packaged for maximum protection. To open, sit the
box upright and cut the reinforced tape at the top of the box. The
product can now be removed.
box upright and cut the reinforced tape at the top of the box. The
product can now be removed.
Pull the grey foam end caps off either side of the unit and remove
the black material covering.
the black material covering.
The SXV2 Phono amplifier is now unpacked and ready for
further installation.
further installation.
Note: Please retain all packaging material for future transport.
Box
Contents
1 x SXV2 Phono Preamplifier
1 x Product manual
1 x Detachable AC power cord
3 x Performance analysis charts
1 x Product manual
1 x Detachable AC power cord
3 x Performance analysis charts
Placing Your
SXV2
The SXV2 should generally be placed close to your source
equipment, thus keeping the interconnect cabling between the
tone arm and phono stage as short as practical. This will reduce
the systems susceptibility to radio frequency interference (RFI),
electromagnetic interference (EMI) and the negative effects
associated with long cables.
equipment, thus keeping the interconnect cabling between the
tone arm and phono stage as short as practical. This will reduce
the systems susceptibility to radio frequency interference (RFI),
electromagnetic interference (EMI) and the negative effects
associated with long cables.
Ventilation
Requirements
The SXV2 is a low power preamplifier. Ventilation requirements
are not considered to be an important factor in product
placement.
are not considered to be an important factor in product
placement.
In the event that the SXV2 is to be incorporated into custom
cabinetry, please refer to the dimensional information provided in
the Specifications section of the manual (Chapter 12).
cabinetry, please refer to the dimensional information provided in
the Specifications section of the manual (Chapter 12).