Furuno FM-4000 Manuel D’Utilisation
FM-4000
Page 18
[H/L] Key
Toggles between 25 W (High) and 1 W (Low) power. When the [H/L] key
is pressed while the transceiver is on CH13 or CH67, the power will
temporarily switch from LO to HI power until the PTT is released. The
temporarily switch from LO to HI power until the PTT is released. The
[H/L] key does not function on transmit inhibited and low-power only
channels.
channels.
CHANNEL SELECTOR KNOB
This rotary knob selects channels and to chooses menu items (such as
the DSC menu, Radio Setup and DSC Setup menu). The [UP(S )] /
This rotary knob selects channels and to chooses menu items (such as
the DSC menu, Radio Setup and DSC Setup menu). The [UP(S )] /
[DOWN(T)] keys on the microphone can also be used to select channels
and menu items.
Secondary Use
y
and menu items.
Secondary Use
y
Press the [F] key first then press the [3(SCAN)] key, and turn the CHAN-
NEL selector knob while holding down the [3(SCAN)] key to confirm
memory channels for scanning.
NEL selector knob while holding down the [3(SCAN)] key to confirm
memory channels for scanning.
y
Adjusts the PA output level while in PA/FOG mode.
KEYPAD
[1(DIM)] Key
[1(DIM)] Key
When in the radio mode, this key directly inputs the digit “1” in a channel
number.
Secondary use
Press the [F] key first, then press the [1(DIM)] key to access the LCD
Press the [F] key first, then press the [1(DIM)] key to access the LCD
Dimmer menu. See section “10.16 LCD DIMMER” for details.
[2(MEM)] Key
When in the radio mode, this key directly inputs the digit “2” in a channel
number.
Secondary use
Press the [F] key first then press the [2(MEM)] key to memorize the
Press the [F] key first then press the [2(MEM)] key to memorize the
selected channel into the transceiver scan memory for scanning. Re-
peating the same procedure ([F] Æ [2(MEM)]), deletes the channel from
the scan memory. See section “10.13 SCANNING” for details.
peating the same procedure ([F] Æ [2(MEM)]), deletes the channel from
the scan memory. See section “10.13 SCANNING” for details.
[3(SCAN)] Key
When in the radio mode, this key directly inputs the digit “3” in a channel
number.
Secondary use (Depends on the transceiver version)
Press the [F] key first then press the [3(SCAN)] key to start and stop the
Press the [F] key first then press the [3(SCAN)] key to start and stop the
scanning of programmed channels. See section “10.13 SCANNING” for
details.
details.