Samsung 700 Manuel D’Utilisation
16
PROGRAM TRUNK NAMES
This program is used to assign a character name or identification for each C.O. line.
You may assign a name of 11 characters long.
You may assign a name of 11 characters long.
PROGRAM KEYS
UP & DOWN - Used to scroll and move cursor.
KEYPAD - Used to enter characters.
HOLD - Press to clear entry.
KEYPAD - Used to enter characters.
HOLD - Press to clear entry.
Open customer programming and follow the instructions below.
ACTION
DISPLAY
1. Press TRSF and then dial 404
[701] TRUNK NAME
Display shows
2. Dial trunk (e.g., 704) OR press UP or
[704] TRUNK NAME
DOWN to select trunk and press the right
soft key to move the cursor
soft key to move the cursor
3. Enter the trunk name using the procedure
[704] TRUNK NAME
in Program Station Names and press the
SAMSUNG
right soft key to return to step 2
4. Press TRSF to store and exit programming
OR press SPK to store and advance to
the next program
the next program
sys_screen.qxp 5/11/2006 6:26 PM Page 23
17
PROGRAM STATION GROUP NAMES
This program is used to assign a character name or identification for each station
group. You may assign a name 11 characters long.
group. You may assign a name 11 characters long.
PROGRAM KEYS
UP & DOWN - Used to scroll and move cursor.
KEYPAD - Used to enter characters.
HOLD - Press to clear entry.
KEYPAD - Used to enter characters.
HOLD - Press to clear entry.
Open customer programming and follow the instructions below.
ACTION
DISPLAY
1. Press TRSF and then dial 602
[501] SGR NAME
Display shows the first group
2. Dial the group number (e.g., 505) OR
[505] SGR NAME
press the UP or DOWN key to make a
selection and press the left or right
soft key to move the cursor
selection and press the left or right
soft key to move the cursor
3. Enter the name using the method
[505] SGR NAME
in Program Station Names
SAMSUNG
4. Press the left or right soft key to return to
step 2 OR press TRSF to store and exit
programming OR press SPK to store and
advance to the next program
programming OR press SPK to store and
advance to the next program
sys_screen.qxp 5/11/2006 6:26 PM Page 24