Avaya MDW 9040 Manuel D’Utilisation

MDW 9040 Wireless Pocket Phone Installation and Use, 

503-801-190

Issue 2, February 2001

This Appendix includes two wall-mounting templates for the following:

Use the template below to position the screws for mounting your MDW 9040 Wireless Pocket Phone battery 
charger:

Cut out the template along the dotted line.

Lightly affix the template to the wall with tape where you want to attach the 
battery charger. If possible, choose a location that will position at least one of the 
screw holes over a wall stud.

Mark the wall.

Position a wall spacer on each of the two wood screws provided, and insert the 
screws in the wall as far as they will go at the places you marked.

If you cannot locate a wall stud for one of the screws, use molly bolts or 
another type of hollow-wall fastener. Be sure to place the wall spacers on 
the screws before inserting them permanently.

Use this template to position the screws for 
mounting your MDW 9040 Wireless Pocket 
Phone battery charger.

Use this template to determine spacing for 
mounting more than one radio module.

1.5 inches (3.81 cm)

center to center

✃

✃

✃