AT&T CL82409 Manuel D’Utilisation

2

Telephone base & charger installation

Install the telephone as shown below. 
The telephone base is ready for tabletop use. If you want to change to wall 
mounting, see user’s manual for details.

1. Use only the power adapter(s) supplied with this product. To order a replacement power 

adapter, visit our website at 

, or call 

. In Canada, dial 

.

2. The power adapters are intended to be correctly oriented in a vertical or floor mount position. 

The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-
the-table or cabinet outlet.

1. Plug one end of 

the telephone line 
cord into the 
telephone jack on 
the bottom of the 
telephone base. 

2. Route the power adapter cord through the slot.

3. Plug the small 

end of the 
telephone base 
power adapter 
into the power 
jack on the 
bottom of the 
telephone base. 

4. Place the cords 

into the 
channels.

5. Plug the large end of 

the power adapter 
into a power outlet 
not controlled by a 
wall switch. 

Power 
adapter

If you have DSL high 
speed Internet 
service, a DSL filter 
(not included) is 
required.

Telephone line 
cord

6. Plug the other end 

of the telephone 
line cord into a 
telephone jack or a 
DSL filter.

7. Raise the antenna.

Plug the power adapter 
into an electrical outlet 
not controlled by a wall 
switch.