Avaya 16xx Manuel D’Utilisation

 

3 

 

 

 

The Avaya 16xx/96xx Amplified Speech Handset ships with 2 AAA-size alkaline 
batteries.  When installing and/or replacing batteries follow the instructions below. 

 

 

1.  Verify that you have two new AAA-size batteries and unplug the handset from the 

cord. 

2.  Remove the battery cover by using your fingernail, press down on the top of the 

battery compartment cover and pull out away from handset.   

3.  Insert the right-side battery, positive end facing down. 
4.  Insert the left-side battery, positive end facing up. 

Note: Diagram printed on bottom of battery compartment shows proper battery 

placement. 

5.  Replace battery cover. 
 
 

Always remove old, weak, or worn-out batteries promptly and safely by unplugging 
the handset from the cord and then removing the batteries.   Recycle or dispose of 
them in accordance with Local and National Disposal Regulations. Install new 
batteries as shown in the figures above. 

Before using the handset, set the slide switch, located inside the battery 
compartment to the mode you want.  The figure below shows the slide switch set to 
Mode 1 (the ‘Push to Amplify’ mode).