ZyXEL Communications P-2304R-P1 Series Manuel D’Utilisation

Chapter 14 Static Route

P-2304R-P1 Series User’s Guide

"

Figure 77   Management > Static Route > IP Static Route

Each field is described in the following table.

Use this screen to edit a static route in the ZyXEL Device. To access this screen, click an Edit 
icon in Management > Static Route > IP Static Route.

Table 62   Management > Static Route > IP Static Route

#

This field is a sequential value, and it is not associated with a specific rule. The 

sequence is important, however. The ZyXEL Device checks each rule in order, 

and it only follows the first one that applies.

Name

This field displays the name that describes the static route.

Active

This field shows whether this static route is active (Yes) or not (No).

Destination

This field displays the destination IP address(es) that this static route affects.

Gateway

This field displays the IP address of the gateway to which the ZyXEL Device 

should send packets for the specified Destination. The gateway is a router or a 

switch on the same network segment as the device's LAN or WAN port. The 

gateway helps forward packets to their destinations.

Modify

Use this field to edit or erase the static route.
Click the Edit icon to open the IP Static Route Edit screen for this static route.
Click the Remove icon to erase this static route.