ZyXEL Communications P-2304R-P1 Series Manuel D’Utilisation

 Chapter 15 Bandwidth MGMT

P-2304R-P1 Series User’s Guide

Use this screen to look at the device’s bandwidth usage and allocation. To access this screen, 
click Management > Bandwidth MGMT > Monitor.

Figure 83   Management > Bandwidth MGMT > Monitor

Application

Select a pre-defined application. If you select a predefined application, do not set 

up the other filter criteria.
FTP (File Transfer Program) enables fast transfer of files, including large files that 

may not be possible by e-mail. Select this to configure the bandwidth filter for FTP 

traffic.
SIP (Session Initiation Protocol) is a signaling protocol used in Internet telephony, 

instant messaging, events notification and conferencing. The ZyXEL Device 

supports SIP traffic pass-through. Select this to configure this bandwidth filter for 

SIP traffic. This makes it easier to manage bandwidth for SIP traffic and is useful, 

for example, when there is a VoIP (Voice over Internet Protocol) device on your 

LAN.

Destination IP 

Address

Enter the destination IP address.

Destination 

Subnet Mask

This field is effective if you specify a Destination IP Address.
Enter the destination subnet mask.

Destination Port

Enter the destination port number.

Source IP 

Address

Enter the source IP address. 

Source Subnet 

Mask

This field is effective if you specify a Source IP Address.
Enter the source subnet mask.

Source Port

Enter the source port number.

Protocol ID

Enter the IP protocol number (service type); for example, 1 for ICMP, 6 for TCP or 

17 for UDP.

Apply

Click this to save your changes and to apply them to the ZyXEL Device.

Cancel

Click this to set every field in this screen to its last-saved value.

Table 72   Management > Bandwidth MGMT > Class Setup > Edit