ZyXEL Communications P-2304R-P1 Series Manuel D’Utilisation

Chapter 19 Logs

P-2304R-P1 Series User’s Guide

The following tables provide descriptions of example log messages.

 

Table 90   System Error Logs

WAN connection is down.

The WAN connection is down. You cannot access the network 

through this interface.

%s exceeds the max. 
number of session per 
host!

This attempt to create a NAT session exceeds the maximum 

number of NAT session table entries allowed to be created per 

host.

Table 91   System Maintenance Logs

Time calibration is 
successful

The device has adjusted its time based on information from 

the time server.

Time calibration failed

The device failed to get information from the time server.

WAN interface gets IP: %s

The WAN interface got a new IP address from the DHCP or  

PPPoE server.

DHCP client gets %s

A DHCP client got a new IP address from the DHCP server.

DHCP client IP expired

A DHCP client's IP address has expired.

DHCP server assigns %s

The DHCP server assigned an IP address to a client.

Successful WEB login

Someone has logged on to the device's web configurator 

interface.

WEB login failed

Someone has failed to log on to the device's web configurator 

interface.

TELNET Login Successfully

Someone has logged on to the router via telnet.

TELNET Login Fail

Someone has failed to log on to the router via telnet.

Successful FTP login

Someone has logged on to the device via ftp.

FTP login failed

Someone has failed to log on to the device via ftp.

NAT Session Table is Full!

The maximum number of NAT session table entries has been 

exceeded and the table is full.

Time initialized by Daytime 
Server

The device got the time and date from the Daytime server.

Time initialized by Time 
server

The device got the time and date from the time server.

Time initialized by NTP 
server

The device got the time and date from the NTP server.

Connect to Daytime server 
fail

The device was not able to connect to the Daytime server.

Connect to Time server fail

The device was not able to connect to the Time server.

Connect to NTP server fail

The device was not able to connect to the NTP server.

Too large ICMP packet has 
been dropped

The device dropped an ICMP packet that was too large.

Configuration Change: PC = 
0x%x, Task ID = 0x%x

The device is saving configuration changes.