ZyXEL Communications P-2304R-P1 Series Manuel D’Utilisation

 Chapter 4 Wizard Setup

P-2304R-P1 Series User’s Guide

The following table describes the labels in this screen.

This screen depends on whether or not the ZyXEL Device successfully registered your SIP 
account(s).

Table 20   VoIP Setup Wizard > SIP Settings

SIP Settings

SIP Number

Enter your SIP number. In the full SIP URI (like 

1234@VoIP-provider.com

), this 

is the part before the @ symbol. You can use up to 127 printable ASCII 

characters.

SIP Server 

Address

Enter the IP address or domain name of the SIP server provided by your VoIP 

service provider. You can use up to 95 printable ASCII characters. It does not 

matter whether the SIP server is a proxy, redirect or register server.

SIP Service 

Domain

Enter the SIP service domain name. In the full SIP URI (like 

1234@VoIP-

provider.com

), this is the part after the @ symbol. You can use up to 127 printable 

ASCII Extended set characters.

Authentication

User Name

Enter the user name for registering this SIP account, exactly as it was given to 

you. You can use up to 95 printable ASCII characters.

Password

Enter the user name for registering this SIP account, exactly as it was given to 

you. You can use up to 95 printable ASCII Extended set characters.

Check here to set 

up SIPx settings

This field is available in the SIP Settings screen.
Select this if you want to set up other SIP account(s), as well as the SIP1 account.

< Back

Click this to go to the previous screen.

Apply

Click this to go to the next screen. If you select Check here to set up SIPx 

settings, the 

 screen appears again for SIP2, SIP3 or SIP 4. 

Otherwise, the ZyXEL Device tries to register your SIP account(s). The following 

screen appears.

Figure 26   VoIP Setup Wizard > Registration Test

Wait until it finishes.

Exit

Click this to close this screen and return to the main screen.