Avaya M7310 Manuel D’Utilisation
M7310 Telephone User Guide
Page 8
- Issue 02a (03 October 2011)
IP Office
1.3 Button Functions
In addition to the standard buttons 0 to 9, * and # buttons for dialing, the phone also has the following additional keys
listed below. Some buttons may use either icons or words depending on your locale and the particular model of the phone
that you have.
listed below. Some buttons may use either icons or words depending on your locale and the particular model of the phone
that you have.
·
Hold
Put the current call on hold. The calls associated call appearance key flashes. Press that key to retrieve the call
from hold.
from hold.
·
Feature
.
·
Release
End (drop) the current call.
· Display Soft Keys
The three keys below the display are called soft keys. Their functions change while you use the phone. The current
function of each key is indicated by the text label in the display.
function of each key is indicated by the text label in the display.
·
Volume Controls
Increase or decrease the volume during a call.
· Handsfree Speaker
The bottom right button is fixed as a handsfree speaker button. You can press this button to answer or make a call
in handsfree speakerphone mode. You can also press it to switch from the handset to the speaker during a call. The
button is lit when the phone is on the speaker.
in handsfree speakerphone mode. You can also press it to switch from the handset to the speaker during a call. The
button is lit when the phone is on the speaker.
· Shift
The triangular Shift button is used with the adjacent set of programmable buttons; those without icons. They
represent both buttons 10 to 21 and buttons 22 to 33. The first set are the ones used by default when you press
any of the buttons. When you want to access or use the second set, press the Shift button and then press the
button. If the phone is idle, it will display Shifted to indicate that you are using the second set of buttons. Note
that the phone will usually revert to the first set of buttons following any use of the buttons.
represent both buttons 10 to 21 and buttons 22 to 33. The first set are the ones used by default when you press
any of the buttons. When you want to access or use the second set, press the Shift button and then press the
button. If the phone is idle, it will display Shifted to indicate that you are using the second set of buttons. Note
that the phone will usually revert to the first set of buttons following any use of the buttons.
. The default
function for those buttons is indicated. The function for each programmable button can be set by you or by your system
administrator.
administrator.
10/22
14/26
18/30
11/23
15/27
19/31
12/24
16/28
20/32
13/25
17/29
21/33
Shift
Display
Release
Feature
Hold
SK1
SK2
SK3
1
2
3
09
04
4
5
6
08
03
7
8
9
07
02
*
0
#
06
01
–
Volume
+
05
Spk
9
64
69
68
71
70
68
74
70
74
70