AT&T 585-310-231 Manuel D’Utilisation
Issue 2.0 December 1995
5-9
8. Select Integrated VMI. (For a dedicated IVR group, select Generic VMI.)
■
On the console: Select
Integ VMI
.
■
On the PC: Press
.
9. Save your entry.
■
On the console: Select
Enter
.
■
On the PC: Press
.
10. Return to the System Programming menu.
■
On the console: Select
Exit
three times.
■
On the PC: Press
three times.
Allowed Lists
Use this procedure to establish Allowed Lists, consisting of telephone numbers
that can be dialed from specified telephones, regardless of calling restrictions
assigned to telephones.
that can be dialed from specified telephones, regardless of calling restrictions
assigned to telephones.
A maximum of eight lists, numbered 0 through 7, with a maximum of 10 numbers
each, numbered 0 through 9, is allowed, Each allowed number can be no more
than 6 digits (an area code plus an exchange) or 6 digits with a leading 1, where
required.
each, numbered 0 through 9, is allowed, Each allowed number can be no more
than 6 digits (an area code plus an exchange) or 6 digits with a leading 1, where
required.
If you program 0 as the first digit of a list entry, any toll restriction assigned to the
station is removed for calls that can be placed by a toll operator.
station is removed for calls that can be placed by a toll operator.
Special characters (such as “pause”) are not permitted in Allowed List entries.
To establish Allowed Lists:
1. From the System Programming menu, select Tables.
■
On the console: Select
Tables
.
■
On the PC: Press
.
The Tables menu appears.
2. Select Allowed Lists.
■
On the console: Select
AllowList
.
■
On the PC: Press
.
The Allowed List screen appears.
3. Enter the list (l = 0-7) and entry (e = 0-9) number. (If you are programming
a sequence, enter the lowest number.)
If you do not enter a list number, List 0 appears.
F3
F10
F5
F8
F1