AT&T 585-310-231 Manuel D’Utilisation
4-20
Issue 2.0 December 1995
Figure 4-10.
Digital Networking Connections
Remote Maintenance
Remote Maintenance is an
optional
application for the MERLIN LEGEND Intuity
system. While it is possible to use the “pass through” capability of the System
Programming and Maintenance Utility (SPM) for remote maintenance, this usually
requires operator assistance to do so. The Remote Maintenance option provides
simpler operation and a higher level of service.
Programming and Maintenance Utility (SPM) for remote maintenance, this usually
requires operator assistance to do so. The Remote Maintenance option provides
simpler operation and a higher level of service.
The Remote Maintenance Modem must be connected to Serial Port 2 (COM2). If
Serial Port 2 (COM2) is already in use, you must do the following:
Serial Port 2 (COM2) is already in use, you must do the following:
1. Move the device (if any) connected to Serial Port 2 (COM2) to the first
available port on the Multi-Port Serial Card. See device specific
instructions elsewhere in this chapter.
instructions elsewhere in this chapter.
2. Readminister the application formerly using Serial Port 2 (COM2) to use
the serial port now connected on the Multi-Port Serial Card.
3. Connect the Remote Maintenance Modem to Serial Port 2 (COM2).
AC Power
Outlet
Outlet
Intuity
System
System
ACCX
Card
J1
To ACCX
ACCX Cable
DCP
Ch1 & 2
RS232
Ch 1
RS232
Ch 2
RS232
Ch 3
RS232
Ch 4
DB-25 M-M Cable
0
1
PWR
PHONE
DIAL
NAS
DTE
Wall Jack
DID Lines
To Public
Network
To Public
Network
Paradyne®
COMSPHERE 3820
Modem
COMSPHERE 3820
Modem
With DID, To Tip/Ring Port
MERLIN LEGEND
Communications System
Without DID, To Public
Network L/S Line
Network L/S Line
or
Processor