AT&T 585-310-231 Manuel D’Utilisation
Issue 2.0 December 1995
5-5
3. Select Group Calling.
■
On the console: Select
Grp Calling
.
■
On the PC: Press
.
The Group Calling menu appears.
4. Select Line/Pool.
■
On the console: Select
Line/Pool
.
■
On the PC: Press
.
The Group Calling screen appears.
5. Enter the extension of the calling group (typically, 770).
6. Save your entry.
■
On the console: Select
Enter
.
■
On the PC: Press
.
7. Enter the Line/Trunk number or pool number you want to assign.
NOTE:
If 801, 802, 803, etc. are in pool 70, then you must specify 70.
8. Save your entry.
■
On the console: Select
Enter
.
■
On the PC: Press
.
9. Repeat Steps 7 and 8 as required for additional lines/pools.
10. Return to the System Programming menu.
■
On the console: Select
Exit
three times.
■
On the PC: Press
three times.
Hunt Type
Use this procedure to assign the hunt-type pattern to calling groups as linear.
When the linear hunting pattern is selected, the system searches for an available
group member in the order in which telephones were assigned to the calling
group.
When the linear hunting pattern is selected, the system searches for an available
group member in the order in which telephones were assigned to the calling
group.
To set the hunt-type pattern to linear:
1. From the System Programming menu, select the Extensions menu.
■
On the console: Select
Extensions
.
■
On the PC: Press
.
The Extensions menu appears.
F4
F10
F10
F10
F5
F6