Avaya 2060 Manuel D’Utilisation

 Planning Soft DSS Keys 

Manager-Secretary Setup – Page 31 

setting up Soft DSS keys you must decide: 
•  How many Soft DSS keys do you want? 

Half-line mode supports up to 4 keys. Full-line mode supports up to 2 keys but 

shows more information. 

•  What Soft DSS key features do you want to have? 

You can use half-line mode to make calls only. You can use full-line mode to 

make calls, send alerts, etc. 

•  What type of calls do you want to make/receive? 

When using Soft DSS keys to make a call, the usage setting of your phone and 

the phone called determines the type of call. The possibilities are: 

•  Standard Call: The same as a normally dialled call. 
•  Page Call: The extension called hears a single tone and can then hear you 

(you cannot hear them). 

•  Direct Call: The extension called hears a single tone and then you can hear 

each other. 

There are four usage settings (Normal, Auto Answer, Voice and Intercom). See 

 

To clear the Soft DSS keys after set-up, cancel all the set extensions (see page 32). 
To setup Soft DSS keys: 

1. Press PROGRAM, SCROLL and then  SOFT DSS. 
2.  Enter your passcode (see page 40). 
3.  The phone shows NO SOFT DSS KEYS. Press  CHANGE until the display 

mode required appears, then press  DONE. 

4.  Enter the first extension number and then press  NEXT. If the right-hand display 

is blank, you can enter another. If you have entered all the extensions, press 

DONE. 

5. Press  USAGE. Press  CHANGE until the setting required appears and then 

press  DONE. 

6. Press PROGRAM to finish. 

INDeX 10.0 2030/50/60 User's Guide 

Manager-Secretary Setup – Page 31 

38DHB0002UKFN Issue 2 (07/2002) 

Planning Soft DSS Keys